365428 volvo:gasket Gasket

Gates 365428 Power Steering Pressure Line Hose Assembly
Gates Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets || Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps || Exceeds SAE J2050 performance requirements || General instructions packed with every individually-bagged assembly

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Black, Gallon) 128 Fl Oz (Pack of 1), 1.00 Gallon (Pack of 1)
TotalBoat ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection; copper biocide keeps barnacles and mussels from clinging to hull bottoms; ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions || EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat; best for boats used frequently; durable finish withstands trailering & beaching better than traditional ablative paints || FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS; because the ablative coating wears away during the season, there's no paint buildup, which makes your bottom paint job easier next season || EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller - TotalBoat Special Brushing Thinner 100; spray equipment - TotalBoat Spray Thinner 101 || AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon; this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only; it is not intended for household use

Gates 365428 Power Steering Pressure Line Hose Assembly
Gates Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets || Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps || Exceeds SAE J2050 performance requirements || General instructions packed with every individually-bagged assembly