4N8871 caterpillar:spider SPIDER AS-FAN

CTP 4N8871 Standard Fan for Models D4D, D4H, D4H-XL, D4H-LPG, 517, IT18B, IT28B, 916, 926E/F, D4E, G926
CTP With the engine off, the ignition locked in the off position, and any required guarding removed, you are now ready to reverse your fan; There is a pink "DANGER" tag provided with your fan that should also be fastened to the ignition switch panel || Individually reverse each blade by simply pushing inward (towards the hub) to compress the spring and then begin to rotate the blade; it should only turn in one direction || Once the blade begins to rotate, you no longer need to keep pushing inward; continue to turn the blade toward the desired position; continue to reverse the remaining blades so that they are all in the same position || Once the blade is rotated fully to the desired position, the blade will "spring" outward and lock itself into place; Now the blade will not be able to be turned around without pushing it inward again; The reversing of one blade is now complete || Now that all of the blades have been reversed, the fan will force the air in the opposite direction; You are now ready to re-install the guarding, unlock the ignition switch, and continue operating the equipment with increased comfort

CTP 4N8871 Standard Fan for Models D4D, D4H, D4H-XL, D4H-LPG, 517, IT18B, IT28B, 916, 926E/F, D4E, G926
CTP With the engine off, the ignition locked in the off position, and any required guarding removed, you are now ready to reverse your fan; There is a pink "DANGER" tag provided with your fan that should also be fastened to the ignition switch panel || Individually reverse each blade by simply pushing inward (towards the hub) to compress the spring and then begin to rotate the blade; it should only turn in one direction || Once the blade begins to rotate, you no longer need to keep pushing inward; continue to turn the blade toward the desired position; continue to reverse the remaining blades so that they are all in the same position || Once the blade is rotated fully to the desired position, the blade will "spring" outward and lock itself into place; Now the blade will not be able to be turned around without pushing it inward again; The reversing of one blade is now complete || Now that all of the blades have been reversed, the fan will force the air in the opposite direction; You are now ready to re-install the guarding, unlock the ignition switch, and continue operating the equipment with increased comfort

CTP 4N8871 Standard Fan for Models D4D, D4H, D4H-XL, D4H-LPG, 517, IT18B, IT28B, 916, 926E/F, D4E, G926
CTP With the engine off, the ignition locked in the off position, and any required guarding removed, you are now ready to reverse your fan; There is a pink "DANGER" tag provided with your fan that should also be fastened to the ignition switch panel || Individually reverse each blade by simply pushing inward (towards the hub) to compress the spring and then begin to rotate the blade; it should only turn in one direction || Once the blade begins to rotate, you no longer need to keep pushing inward; continue to turn the blade toward the desired position; continue to reverse the remaining blades so that they are all in the same position || Once the blade is rotated fully to the desired position, the blade will "spring" outward and lock itself into place; Now the blade will not be able to be turned around without pushing it inward again; The reversing of one blade is now complete || Now that all of the blades have been reversed, the fan will force the air in the opposite direction; You are now ready to re-install the guarding, unlock the ignition switch, and continue operating the equipment with increased comfort