| S/N start | S/N end | Variant |
| 21064 | 23058 | 633479 |
| 23059 | None | 885812 |
| 51 | 99999 | 870409 |
9835.750.
Tamper knife edge with heating, for extension
54445937, LH-54445945, RH
750
`
For full view, you need register
Parts on group Tamper knife edge with heating, for extension:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | RM54612734 | [1] | Bar | S/N 51 - 13039 |
| 4. | RM87984381 | [1] | Plate | S/N 13133 - |
| 5. | RM14098370 | [3] | Hexagon nut | S/N 51 - 13039 |
| 5. | RM96712799 | [3] | Hexagon nut | S/N 13040 - |
| 6. | RM96713243 | [3] | Hexagon screw | |
| 7. | RM58832916 | [2] | Lock washer | |
| 8. | RM96714266 | [2] | Hexagon screw | |
| 9. | RM80633258 | [1] | Heating pipe | S/N 15012 - |
| 9. | RM56296593 | [1] | Heater | S/N 51 - 15011 |
| 30. | RM87983227 | [1] | Plug | S/N 13133 - |
| 32. | RM80639545 | [1] | Plug | S/N 15012 - |
| 1. | RM54612742 | Bar | S/N 51 - 13039 | |
| 1. | RM54612734 | [1] | Bar | S/N 13040 - |
| 1. | RM54612742 | Bar | S/N 12967 - | |
| 2. | RM56296445 | [1] | Angle plate | |
| 2. | RM56296452 | Angle bar | ||
| 3. | RM56296437 | [1] | Tension block | |
| 3. | RM56296429 | Tension block | ||
| 4. | RM54446034 | [1] | Flat bar | S/N 51 - 13132 |
Parts best sale:
4437880 - HOSE AS
3065730 - KIT-JOYSTICK
6V4705 - VALVE GRINDING
4667614 - PUMP;PISTON
6V2714 - HANDLE ASSEM.
1067131 - SHAFT
R51376 - VALVE
2485513 - REGULATOR-TEMPERATURE
3899576 - AIR COMPRESSOR GP
7P7777 - ARM A-LIFT
3406184 - PUMP GP-PISTON
85801250 - BREATHER
5537302 - SOLENOID AS
9262319 - PUMP DEVICE
6Y3840 - EDGE-CUTTING
4854895 - PUMP GP-WATER
LW10116981 - Engine Controller
VOE20798186 - Cylinder head gasket
2880934 - ROLLER GP-TRACK-SINGLE FLANGE
4J0522 - SEAL-O-RING
VOE14535458 - Gear pump
1654262 - BODY AS-PISTON
2746851 - GASKET-TURBOCHARGER
8N7005 - INJECTOR GP-FUEL
2W0422 - LINE AS-FUEL INJ